Roundtrip efficiency
Roundtrip efficiency is a key performance metric for an energy storage system (ESS) that evaluates the energy losses incurred during a complete charging and discharging cycle.[1] It is defined as the ratio of the energy output from the system during discharge to the energy input supplied during charging. A higher round-trip efficiency indicates lower energy losses and maximizes the usable energy stored in the system, which improves overall performance and reduces operational costs.[1]
The efficiency can be expressed as a percentage using the formula:
Maximizing round-trip efficiency is considered essential for the economic viability and sustainability of energy storage systems, particularly for applications in grid stability, renewable energy integration, and peak demand management.[1]
Factors affecting efficiency
[edit]The round-trip efficiency of a storage system accounts for losses from multiple sources. These can include:[1]
- Conversion inefficiencies
- Heat dissipation
For the green ammonia and green ammonia the main factors are:
- water electrolysis voltage required for production of hydrogen (the energy required for ammonia synthesis is relatively small). The hydrogen production energy linearly depends on the required voltage (that in turn depends on the catalyst used in anode and cathode);[2]
- efficiency of the power plant that burns the fuel (combined cycle gas turbine provides the highest efficiency of 64% assumed for high-end estimates).[2]
Achieving high efficiency requires careful selection of energy storage technologies, optimization of system components, and the use of advanced control strategies to minimize energy losses.[1]
Comparison of storage methods
[edit]Different energy storage technologies exhibit a wide range of round-trip efficiencies. The technology is often selected based on its intended application, such as providing power quality and distributed power or serving as bulk energy storage.[3]
| Storage Technology | Median Efficiency (%) | Efficiency Range (%) |
|---|---|---|
| Lead-acid battery | ~75% | ~68% – 82% |
| Li-ion battery | ~85% | ~75% – 95% |
| Sodium–sulfur battery | ~65% | ~62% – 70% |
| Flywheel | ~93% | ~90% – 95% |
| Superconductive | ~90% | ~85% – 95% |
| Compressed air | ~52% | ~42% – 72% |
| TES Thermal | ~98% | ~97% – 99% |
| Pumped hydro | ~75% | ~65% – 82% |
| Green hydrogen | ~40%[5] | 28 – 52%[6] |
| Green ammonia | 23 – 42%[6] |
References
[edit]- ^ a b c d e Penthia 2025, p. 290.
- ^ a b Kojima 2025, p. 2.
- ^ Ma, Glatzmaier & Kutscher 2011.
- ^ Ma, Glatzmaier & Kutscher 2011, p. 9, Figure 9.
- ^ Headley & Schoenung 2015, p. 3.
- ^ a b Kojima 2025, Abstract.
Sources
[edit]- Headley, Alexander J.; Schoenung, Susan (2015). "Hydrogen Storage". U.S. DOE Energy Storage Handbook (PDF). Albuquerque, NM & Livermore, CA: Sandia National Laboratories. SAND2015-1002.
- Kojima, Yoshitsugu (2025). "Round-trip efficiencies of green ammonia and green hydrogen". Next Energy. 8 100340. doi:10.1016/j.nxener.2025.100340.
- Penthia, Trilochan (2025). "Energy Storage Systems for Electrical Vehicle Chargers". In Kumar, A.; Bansal, R.C.; Kumar, P.; He, X. (eds.). Handbook on New Paradigms in Smart Charging for E-Mobility: Global Trends, Policies, and Practices. Elsevier. ISBN 978-0-323-95202-6. Retrieved 2025-10-17.
- Ma, Zhiwen; Glatzmaier, Greg C.; Kutscher, Charles F. (August 7–10, 2011). "Thermal Energy Storage and Its Potential Applications in Solar Thermal Power Plants and Electricity Storage". Proceedings of the ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference. Washington, DC: ASME. ESFuelCell2011-54077.